Polymer Mat 100 × 60 cm

Reusable Barrier for Reducing Contaminant Transfer

The polymer mat 100 × 60 cm is designed to reduce the amount of contaminants transferred on the soles of footwear and the wheels of trolleys and transport equipment. It can be used at entrances to Cleanrooms, laboratories, production areas and other environments where maintaining an increased level of cleanliness is important.

The surface, made of polymer resin, has adhesive properties that allow it to capture dust, dirt, fibres and other fine contaminants when walking or passing over the mat. Reducing the amount of contamination already in the entrance area helps minimise its further transfer into the protected area and supports contamination control between individual zones.

Washable Surface Instead of Peel-Off Layers

Unlike disposable adhesive mats equipped with successive peel-off sheets, the polymer mat is designed for repeated use. You can clean its surface regularly and reuse it without removing successive layers of material.

According to the specification, the mat withstands at least 1,500 washing cycles, allowing long-term use. This solution reduces consumable waste associated with regular layer replacement and simplifies daily maintenance of the entrance area.

Regular cleaning removes accumulated contaminants and prepares the mat for further use. This allows it to be incorporated into an established cleaning procedure for a given area.

For Pedestrian and Wheeled Traffic

The mat is 3 mm thick, creating a low profile in passage areas. It suits both pedestrian traffic and wheeled warehouse vehicles, making it suitable for trolley and other transport routes.

The 100 × 60 cm format is particularly suitable for entrances to designated rooms, passageways and locations where the transfer of contaminants between individual zones needs to be reduced.

The mat is designed for regular use in industrial, laboratory, and other areas requiring increased contamination control.

Surface Parameters

Several parameters define the adhesive surface's adhesion and durability. Initial tack is 211# according to GB/T 4852-2002, peel strength is specified at ≥10 G, while cohesive strength is ≥72 h.

These parameters describe the functional properties of the polymer layer responsible for contact with footwear, wheels and the contaminants carried by them.

Key information

model: M3.0,

dimensions: 100 × 60 cm,

material: polymer resin,

thickness: 3 mm,

surface with adhesive properties,

suitable for pedestrian traffic and wheeled warehouse vehicles,

number of washing cycles: ≥1,500,

initial tack: 211# according to GB/T 4852-2002,

peel strength: ≥10 G,

cohesive strength: ≥72 h.

Reusable Solution for Areas Requiring Contamination Control

The polymer mat 100 × 60 cm is suitable for areas where contaminants carried on footwear and wheels may be transferred into more demanding production, laboratory or Cleanroom environments. Its washable surface, ability to withstand at least 1,500 cleaning cycles and elimination of the need to regularly peel off and replace successive layers make it a practical solution for long-term use.

Placed at an appropriately selected traffic point, it helps create an additional barrier between a general area and a zone requiring a higher level of contamination control.
- Catalog no.
  
  RE-MP-1206
- Weight
  
  3,7 kg
- Delivery
Name and surname / Company name*

E-mail*

Phone

City*

Post code*

Treść wiadomości*

I accept the regulations and agree.

I have read the administrator information and accept the privacy policy.*

I agree to receive information about current offers and promotions.

Description

Polymer Mat 100 × 60 cm

Reusable Barrier for Reducing Contaminant Transfer

The polymer mat 100 × 60 cm is designed to reduce the amount of contaminants transferred on the soles of footwear and the wheels of trolleys and transport equipment. It can be used at entrances to Cleanrooms, laboratories, production areas and other environments where maintaining an increased level of cleanliness is important.

The surface, made of polymer resin, has adhesive properties that allow it to capture dust, dirt, fibres and other fine contaminants when walking or passing over the mat. Reducing the amount of contamination already in the entrance area helps minimise its further transfer into the protected area and supports contamination control between individual zones.

Washable Surface Instead of Peel-Off Layers

Unlike disposable adhesive mats equipped with successive peel-off sheets, the polymer mat is designed for repeated use. You can clean its surface regularly and reuse it without removing successive layers of material.

According to the specification, the mat withstands at least 1,500 washing cycles, allowing long-term use. This solution reduces consumable waste associated with regular layer replacement and simplifies daily maintenance of the entrance area.

Regular cleaning removes accumulated contaminants and prepares the mat for further use. This allows it to be incorporated into an established cleaning procedure for a given area.

For Pedestrian and Wheeled Traffic

The mat is 3 mm thick, creating a low profile in passage areas. It suits both pedestrian traffic and wheeled warehouse vehicles, making it suitable for trolley and other transport routes.

The 100 × 60 cm format is particularly suitable for entrances to designated rooms, passageways and locations where the transfer of contaminants between individual zones needs to be reduced.

The mat is designed for regular use in industrial, laboratory, and other areas requiring increased contamination control.

Surface Parameters

Several parameters define the adhesive surface's adhesion and durability. Initial tack is 211# according to GB/T 4852-2002, peel strength is specified at ≥10 G, while cohesive strength is ≥72 h.

These parameters describe the functional properties of the polymer layer responsible for contact with footwear, wheels and the contaminants carried by them.

Key information

model: M3.0,
dimensions: 100 × 60 cm,
material: polymer resin,
thickness: 3 mm,
surface with adhesive properties,
suitable for pedestrian traffic and wheeled warehouse vehicles,
number of washing cycles: ≥1,500,
initial tack: 211# according to GB/T 4852-2002,
peel strength: ≥10 G,
cohesive strength: ≥72 h.

Reusable Solution for Areas Requiring Contamination Control

The polymer mat 100 × 60 cm is suitable for areas where contaminants carried on footwear and wheels may be transferred into more demanding production, laboratory or Cleanroom environments. Its washable surface, ability to withstand at least 1,500 cleaning cycles and elimination of the need to regularly peel off and replace successive layers make it a practical solution for long-term use.

Placed at an appropriately selected traffic point, it helps create an additional barrier between a general area and a zone requiring a higher level of contamination control.

Technical details