Polymer Mat 200 × 100 cm
Large Surface Area for Reducing Contaminant Transfer
The polymer mat 200 × 100 cm is designed to reduce the amount of contaminants transferred on the soles of footwear and the wheels of trolleys and transport equipment. Thanks to its large surface area, it can be used in wider passageways, traffic routes and at entrances to Cleanrooms, laboratories and other areas requiring increased contamination control.
The surface, made of polymer resin, has adhesive properties that allow it to capture dust, dirt, fibres and other fine contaminants upon contact with footwear or wheels. Capturing contaminants before they enter the protected area helps reduce their further spread inside the room.
Larger Format for Foot and Wheeled Traffic
The dimensions of 200 × 100 cm provide an extensive working surface. The longer contact area increases the possibility of repeated contact between the sole or wheel and the polymer surface when walking or passing over the mat.
The large format is particularly practical in areas where transport trolleys or other wheeled equipment are used in addition to pedestrian traffic. The mat is suitable for wheeled warehouse vehicles, allowing it to be used in traffic routes serving internal transport.
The mat is 3 mm thick, allowing it to maintain a low profile despite its large dimensions. The construction has been designed for regular use in industrial and controlled environments.
Washable and Designed for Repeated Use
The mat does not use a system of successive peel-off sheets. Its polymer surface can be cleaned and reused, helping to reduce the amount of consumable waste associated with replacing disposable layers.
Regular removal of accumulated contaminants prepares the surface for continued use and allows its cleaning to be incorporated into established cleanliness maintenance procedures.
This solution is particularly suitable for areas where the mat is used intensively and regularly exposed to contact with footwear and wheels.
Polymer Surface Parameters
The material has an initial tack of 211# according to GB/T 4852-2002. Peel strength is ≥10 G, while cohesive strength is specified at ≥72 h.
The polymer resin used is designed for repeated use and regular cleaning, allowing the mat to be used as a permanent element in the organisation of entrance and transition zones.
Key information
- model: M3.0,
- dimensions: 200 × 100 cm,
- material: polymer resin,
- thickness: 3 mm,
- suitable for pedestrian traffic and wheeled warehouse vehicles,
- surface designed for repeated cleaning and use,
- initial tack: 211# according to GB/T 4852-2002,
- peel strength: ≥10 G,
- cohesive strength: ≥72 h.
Reusable Mat for Larger Passageways and Entrance Areas
The polymer mat 200 × 100 cm is suitable for areas where a larger surface is required to reduce the transfer of contaminants between individual zones. Its dimensions make it suitable for both pedestrian and wheeled traffic, while the ability to wash it repeatedly allows it to be used without regularly removing successive layers of material.
It is a practical solution for organising entrances and traffic routes leading to rooms with increased cleanliness requirements.
